We combine the following features into one design:

1. Safety: enhanced (width) lighting + protection of the front wheels

2. Practical use: front weight + integrated storage box

3. Design: in the colors of your tractor with your own logo.

We hold a patent on the hinged side panels. These can be locked in various positions and can rotate completely forward. Patent number EP2815928 A1. Click here for the patent. View the unique features here.

Yes, the SafetyWeight weights have a towingpoint in the top link support where a rope can be attached. We have tested this extensively, watch the video here:

The SafetyWeight bumper is packed compact on an EUR pallet. The side parts are located in the storage box. First connect the middle frame with the front linkage and then mount the side panels, see the video:

There are 2 coupling positions for the bumper, standard in the front position. If the front linkage is compact and fully raised, the bumper may touch the linkage arm. The ball position must then be moved to the position 2, more at the back Loosen the M27 bolt (key 41), move the nut inside the rail and tighten again.

The following weights are possible: 300kg, 400kg, 500kg, 600kg, 800kg, 1000kg or 1100kg. Selected weight cannot be adjusted afterwards. Need more weight? Look at our Safetyweight Plus models till 2500kg.

No, it is not possible to increase or decrease the weight afterwards.

Yes, a SafetyWeight bumper of 800 kg, the total weight is 800 kg, so including the bumper side panels.

As ballast we use small punch caps, residual material from perforated sheet. This in combination with concrete gives a strong and solid construction.

The storage box is 80 cm wide, 19 cm deep, 19 cm high at the front and 37 cm high at the rear. The volume is 55 liters.

No, protruding parts in front of the bumper are not safe, so the option is not possible.

This depends on the weight. 19 cm on the 300, 400,500 kg models, 23 cm on the 600 and 800 models, 32 cm on the 1000 and 1100 models.

Width adjustable from 2,3 meter till 2,7 meter. With longer side panels (without surcharge) up to 3 metres. Ask for the possibilities

No, a tractor bumper is not mandatory in any country.

A few of accidents have now been reported in which the TractorBumper has undoubtedly limited the consequences.

Only subsidy in possible in Belgium, callled “VLIF”.  According to our data, subsidy is not possible in all other countries